L-Bend and J-Bend
Anchor Bolts

  • 3/8 to 1-1/2 diameter
  • 4" to 18' length
  • 304/316 s/s, A36,
    F1554 Gr. 36. 55 & 105
  • 4140 Heat Treated/Annealed
  • Zinc Plated, Hot Dip Galvanized, or Plain Finish

Single End Rods

  • 3/8 to 1-1/2 Diameter
  • 4" to 18' length
  • 304/316 s/s, A36,
    F1554 Gr. 36. 55 & 105
  • 4140 Heat Treated/Annealed
  • Zinc Plated, Hot Dip Galvanized, or Plain Finish

Double End Rods

  • 3/8 to 1-1/2 Diameter
  • 4" to 18' length
  • 304/316 s/s, A36,
    F1554 Gr. 36. 55 & 105
  • 4140 Heat Treated/Annealed
  • Zinc Plated, Hot Dip Galvanized, or Plain Finish

U-Bolts

U-bolts
  • 3/8 to 1-1/2 Diameter
  • 4" to 18' length
  • 304/316 s/s, A36,
    F1554 Gr. 36. 55 & 105
  • 4140 Heat Treated/Annealed
  • Zinc Plated, Hot Dip Galvanized, or Plain Finish

Plate Washers

washers
  • 1/16THK through 1" THK
  • 1/2 wide to 12" wide
  • 1/4" hole to 3" hole
  • 304/316 s/s, A36,
    F1554 Gr. 36. 55 & 105
  • 4140 Heat Treated/Annealed
  • Zinc Plated, Hot Dip Galvanized, or Plain Finish

Angle Brackets

angle brackets
  • 1/4THK through 1/2" THK
  • 1" wide through 8" wide
  • 1/4 hole to 3" hole
  • 304/316 s/s, A36,
    F1554 Gr. 36. 55 & 105
  • 4140 Heat Treated/Annealed
  • Zinc Plated, Hot Dip Galvanized, or Plain Finish

Full Thread Studs

full thread studs
  • #8 through 4" Diameter
  • 1/4" long through 12'
  • 304/316 s/s, A36,
    F1554 Gr. 36. 55 & 105
  • 4140 Heat Treated/Annealed
  • A307, A193 B7, B8, B8M
  • Zinc Plated, Hot Dip Galvanized, or Plain Finish